Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Comparison of pre-irradiation and mutual grafting of 2-chloroacrylonitrile on cellulose by gamma-irradiation

Radiation-induced graft polymerization is one of the best methods for obtaining materials with new properties. In this work, radiation grafting of 2-chloroacrylonitrile to cellulose by mutual and pre-irradiation grafting methods was investigated. The grafting yield was enhanced by applying the emulsion grafting method. The grafting yield determined in the above systems was observed as 27% at highest and 6% at lowest. The effects of concentration of monomer, reaction time and reaction temperature on grafting yield were studied. Evidence of grafting has been based on the comparative studies of cellulose and grafted cellulose by infrared spectroscopy, thermal analysis and contact angle measurement. Grafting enhances thermal stability of cellulose backbone.     

Thermal desorption/gas chromatography/mass spectrometry approach for characterization of the volatile fraction from amber specimens: A possibility of tracking geological origins

Research on the chemical composition of fossil resins has evolved during the last decades as a multidisciplinary field and is strongly oriented toward the correlation with their geological and botanical origin. Various extraction procedures and chromatographic techniques have been used together for identifying the volatile compounds contained in the fossil resin matrix. Hyphenation between thermal desorption (TD), gas chromatography (GC) and mass spectrometry detection (MS) has been chosen to investigate the volatile compounds fraction from ambers with a focus on Romanite (Romanian amber) and Baltic amber species. A data analysis procedure was developed for the main purpose of fingerprinting ambers based on the MS identity of the peaks generated by the volatile fraction, together with their relative percentual area within the chromatogram. Chromatographic data analysis was based entirely on Automated Mass Spectral Deconvolution & Identification System (AMDIS) software to produce deconvoluted mass spectra which were used to build-up a mixed mass spectra and relative retention scale library. Multivariate data analysis was further applied on AMDIS results with successful discrimination between Romanite and Baltic ambers. A special trial was conducted to generate pyrolysis “like” macromolecular structure breakdown to volatile compounds by gamma irradiation with a high absorbed dose of 500 kGy. Contrary to our expectations the volatile fraction fingerprints were not modified after irradiation experiments. A complementary non-destructive new approach by ESR spectroscopy was also proposed for discriminating between Romanite and Baltic ambers.     

Asymptotic properties of a new Sturm–Liouville problem with retarded argument

In this work, we study the asymptotic properties of a new Sturm–Liouville problem with retarded argument. Contrary to previous works, differential equation includes eigenparameter as a quadratic function. In the considered problem arise new difficulties. Copyright © 2013 John Wiley & Sons, Ltd.     

On the Eigenvalues and Eigenvectors of a Lorentzian Rotation Matrix by Using Split Quaternions

In this paper, we examine eigenvalue problem of a rotation matrix in Minkowski 3 space by using split quaternions. We express the eigenvalues and the eigenvectors of a rotation matrix in term of the coefficients of the corresponding unit timelike split quaternion. We give the characterizations of eigenvalues (complex or real) of a rotation matrix in Minkowski 3 space according to only first component of the corresponding quaternion. Moreover, we find that the casual characters of rotation axis depend only on first component of the corresponding quaternion. Finally, we give the way to generate an orthogonal basis for ${\mathbb{E}^{3}_{1}}$ by using eigenvectors of a rotation matrix.     

Commutators of sublinear operators generated by Calderón-Zygmund operator on generalized weighted Morrey spaces

In this paper, the boundedness of a large class of sublinear commutator operators T _b generated by a Calderón-Zygmund type operator on a generalized weighted Morrey spaces \({M_{p,\varphi }}(w)\) with the weight function w belonging to Muckenhoupt’s class A _p is studied. When 1 < p < ∞ and b ∈ BMO, sufficient conditions on the pair (φ ₁, φ ₂) which ensure the boundedness of the operator T _b from \({M_{p,\varphi 1}}(w)\) to \({M_{p,\varphi 2}}(w)\) are found. In all cases the conditions for the boundedness of T _b are given in terms of Zygmund-type integral inequalities on (φ ₁, φ ₂), which do not require any assumption on monotonicity of φ ₁(x, r), φ ₂(x, r) in r. Then these results are applied to several particular operators such as the pseudo-differential operators, Littlewood-Paley operator, Marcinkiewicz operator and Bochner-Riesz operator.     

A collocation method based on the Bessel functions of the first kind for singular perturbated differential equations and residual correction

In this paper, a collocation method is given to solve singularly perturbated two‐point boundary value problems. By using the collocation points, matrix operations and the matrix relations of the Bessel functions of the first kind and their derivatives, the boundary value problem is converted to a system of the matrix equations. By solving this system, the approximate solution is obtained. Also, an error problem is constructed by the residual function, and it is solved by the presented method. Thus, the error function is estimated, and the approximate solutions are improved. Finally, numerical examples are given to show the applicability of the method, and also, our results are compared by existing results. Copyright © 2014 JohnWiley & Sons, Ltd.     

A Comparison of the LVDP and ΛCDM Cosmological Models

We compare the cosmological kinematics obtained via our law of linearly varying deceleration parameter (LVDP) with the kinematics obtained in the ΛCDM model. We show that the LVDP model is almost indistinguishable from the ΛCDM model up to the near future of our universe as far as the current observations are concerned, though their predictions differ tremendously into the far future.     

Total Synthesis of the Biologically Active,Naturally Occurring 3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol and Regioselective O‐Demethylation of Aryl Methyl Ethers

3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol ( 2 ), a natural product, has been synthesized for the first time starting from (3‐bromo‐4,5‐dimethoxyphenyl)methanol ( 5 ) in five steps and with an overall yield of 34%. The reaction of some methoxymethyl‐substituted aryl methyl ethers with BBr₃, followed by the addition of MeOH, afforded the corresponding methoxymethyl‐substituted arylphenols in high yields.     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010